OEM 3/4 Flutes Ƙarshen niƙa tare da Madaidaicin Shank da Yankan Yankan Wave

Aikace-aikace

The 3 Flutes Ƙarshen niƙa tare da madaidaiciya Shank da Wave Cutting Edges ya dace da m machining na aluminum gami, da kuma gefen machining, mataki machining, da dama kwana tsagi machining.Kuma 4 Flutes End Mills tare da madaidaiciya Shank da Wave Cutting Edges ya dace da sarrafa carbon karfe, gami da baƙin ƙarfe, simintin gyare-gyare, baƙin ƙarfe, ƙarfe da aka riga aka rigaya, ƙarfe mai ƙare (~ 40HRC) l, da dai sauransu Ya dace da sarrafa gefe, sarrafa mataki, da sarrafa madaidaicin tsagi.

Ƙayyadaddun bayanai

Abubuwan da ake amfani da su don samar da injin ƙarshen sarewa 3 shine UK10, tare da masu yankan niƙa ana samun su a cikin diamita daga 6 mm zuwa 20 mm, da jimlar kayan aikin da ke jere daga 50 mm zuwa 100 mm.Matsakaicin kusurwa na ƙugiya shine digiri 45.

Danyen kayan don samar da injin ƙarewar sarewa 4 shine UK30, wanda aka lulluɓe da ATN.Matsakaicin kusurwa na ƙugiya yana da digiri 30, kuma diamita na waje na mai yankan milling yana samuwa a cikin kewayon 6 mm zuwa 20 mm.Jimlar tsayin mai yankan shine 50 mm zuwa 100 mm.

Saukewa: ALBCM3N/BCM4F

1. Lokacin da zurfin yankan ya kasance ƙananan, saurin juyawa da saurin ciyarwa za a iya ƙara ingantawa
2. Ana ba da shawarar ruwan yankan ruwa mai narkewa
3. Ana bada shawarar niƙa saman
4 .A cikin yanayin na'ura da aikin shigarwa rigidity ba shi da kyau, wanda zai haifar da rawar jiki da sauti mara kyau, a wannan lokaci ya kamata ya hanzarta saurin gudu da kuma ciyar da sauri.
5. Tsawon dakatarwa na mai yanke ya kamata ya zama takaice kamar yadda zai yiwu.
6. Tebur na sama yana dogara ne akan ƙimar ƙimar yankan gefe.Yanayin yanke don niƙa ramin sun dogara ne akan 70% na saurin yankan a cikin tebur da ke sama da 50% na saurin ciyarwa.

1. Da fatan za a yi amfani da kayan aikin injin madaidaici da kayan aiki.
2. Da fatan za a yi amfani da sanyaya iska ko yanke ruwan da ba shi da saurin haifar da hayaki.
3. Ana ba da shawarar yankan laushi don yankan gefe.
4. Lokacin da ƙaƙƙarfan shigarwa na kayan aikin kayan aikin na'ura ba shi da kyau, rawar jiki da sauti mara kyau na iya faruwa.A wannan
lokaci, saurin da saurin ciyarwa a cikin tebur na sama ya kamata a rage kowace shekara.
5. Tsawon dakatarwa na mai yanke ya kamata ya zama takaice kamar yadda zai yiwu.